Fayat Dynapac F80W, Operating Manual

Page: 118 / 198

112 F80W
α = 7° (12%)
D451171
2.7 Machine transport
2.7.2 Loading the machine using a ramp
Use a loading ramp to load the machine onto the transport ve-
hicle.
When loading the machine using a ramp, all safety regulations
related to loading of the machine and complying with the na-
tional regulations in the place of loading must be adhered to.
The ramp must have appropriate loading capacity, anti-slip sur-
face and must be put on a flat surface. We recommend that you
adhere to the BGR 233 regulation.
The maximum permissible value of incline of the ramp is 12 %.
Procedure for loading the machine using a ramp:
• As needed, turn on the battery disconnecter.
• Set the tilting platform to the working position.
• Get on the driver's stand.
• Start the engine.
• Deactivate the parking brake.
• Drive the machine onto the transport vehicle.
• Stop the machine.
• Unlock the screed and lower the screed on the cargo bed of
the mean of transport using the foot switch (48).
• Activate the parking brake.
• Turn off the engine.
• Leave the driver’s stand.
• Set the footboard into the transportation position.
• Turn off the battery disconnecter.
• Anchor the machine and mechanically secure it with slings
in tie-down holes against longitudinal and lateral displace-
ment as well as against overturning during transport.
• Secure the machine wheels against accidental movement
using wedges.
When loading the machine, another person must be
present to give hand signals to the machine operator.
See the list of hand signals in chapter 2.1.9.
Pay increased attention when loading the machine. Im-
proper handling can cause serious injury or death.
Caution! There is a risk of serious injury or death by the
machine falling down when it is being loaded on the
transport vehicle.
Anchor the machine and mechanically secure it with
slings in tie-down holes against longitudinal and later-
al displacement as well as against overturning during
transport.
Secure the machine wheels against accidental move-
ment using wedges.
A failure to observe prescribed ramp parameters with re-
gard to the maximum permissible inclination of the ma-
chine may cause damage to the machine.