Fayat Dynapac F80W, Operating Manual

Page: 139 / 198

133 F80W
D451113A
1
451194
MIN MAX
MAINTENANCE MANUAL
3.6.2 Engine oil check
Ensure that the machine is standing on a level and firm surface.
If the engine was running, wait for about 5 minutes until the oil
runs down to the engine sump.
Oil check procedure:
• Pull out the oil dipstick gauge (1), wipe it.
• Put is back up to the stop, pull out again and read height of
the level.
• If required, fill up the oil through the filler neck after taking
pout the oil dipstick gauge (1).
Note
• The lower “MIN” mark shows the lowest possible oil level, the
upper “MAX” mark the highest possible oil level.
• After refilling, wait approximately for 5 minutes before oil
flows to the sump and check the level again.
• The total volume of oil in the engine is 1.8 l (0.5 US gal).
Do not use the engine if oil level in the engine is not
correct.
The oil level should be maintained between the marks
stamped on the oil-gauge rod.
Use the same type of oil for refilling as given in Chapter
3.2.1
Check the engine for leakage, repair possible causes.
Check the engine for damaged and/or missing parts and
for changes in appearance.
Stop the oil soaking into the ground.