Fayat Dynapac F80W, Operating Manual

Page: 116 / 198

110 F80W
2.6 Operation of the screed
2.6.11 End of paving
Complete the following tasks before the end of paving:
• Stop the machine as needed.
• Activate the parking brake.
• Turn off the screed gas heating.
• Place the screed into a safe position, as needed, to avoid
potential spontaneous fall of the screed.
- Lower the screed to the ground.
- Lock the screed.
• Turn off the engine.
• Leave the driver’s stand.
• Set the footboard into the transportation position.
• As needed, set the paving direction indicator to the trans-
portation position.
• As needed, turn off the battery disconnecter.
After the end of paving the machine must be shut-down
on a flat solid surface.
If the machine is not subsequently operated, park the
machine.
If the machine is parked, the gas bottle must be removed
from the machine and stored in a special area.
Turn off the battery disconnecter when parking the
machine.
When the machine is parked, protect the dashboard and
the engine compartment from unauthorized access of
others by locking the dashboard cover and the engine
bonnet.