Fayat Dynapac F80W, Operating Manual

Page: 69 / 198

63 F80W
OPERATING MANUAL
Emergency switch (1)
Press the button to enable the machine emergency brake,
which is indicated by lighting up the brake, emergency stop and
charging indicator lamps on the display.
The machine stops moving and the engine stalls!
Paving width switch – left (2)
It serves for increasing/decreasing the paving width on the left
side.
• Left – the left part of the screed is extended.
• Middle – neutral position.
• Right – the left part of the screed is retracted.
Paving width switch – right (3)
It serves for increasing/decreasing the paving width on the right
side.
• Right – the right part of the screed is extended.
• Middle – neutral position.
• Left – the right part of the screed is retracted.
Front wheel turning angle indicator (4)
It shows the turning angle of the front wheel to the left or right.
Steering wheel (5)
Vibration unit switch (6)
(optional equipment)
It serves for turning on the vibration.
• Upper position – the vibration unit on
• Lower position – the vibration unit off
The vibration unit is only active in the operating mode when ma-
chine travels forward.
Safety cover (7)
Protection against vandalism and unauthorized use of the ma-
chine.
Travel controller (8)
The travel controller is used for braking the machine and setting
the direction and speed of travel. The travel control is fitted with
an arresting ring, which must be pulled up before the control is
moved.
Travel controller positions:
N – Neutral – the machine is braked, idle engine speed set up
F – Forward travel
R – Reverse travel
That the machine is braked is signalled on the dashboard.
Mounting socket 12 V (9)
It is used for connecting a beacon, a mounting lamp or other
equipment (12 V).
Engine speed adjusting controller (10)
The accelerator controller regulates the engine speed.
• Position up: standard speed (1,100 rpm)
• Position down: maximum speed (2,600 rpm)
To operate the machine, set the speed at maximum.
Ignition box (11)
Switch with three positions:
• Position “0” (with arresting): engine OFF.
- No electrical devices are powered.
• Position “1” (with arresting):
- All electrical devices are powered.
• Intermediate position: Engine pre-heating
• Position “2” (without arresting): Starting up of the engine
Warning horn (12)