Fayat Dynapac F80W, Operating Manual

Page: 157 / 198

151 F80W
451131
3
4
2
451132
5
4
2
1
451133
1
2
MAINTENANCE MANUAL
3.6.15 Rear wheel fastening check
• The procedure is identical for the left and right side of the
machine.
Rear wheel fastening check procedure (the machine has one
wheel on the left and right side):
• Check tightening of all bolts (1) on the rear wheels (2).
• The tightening torque value for the bolts (1) is 48 Nm (35.4
lb ft).
Rear wheel fastening check procedure (the machine has two
wheels on the left and right side):
• Remove the bolts of the outer wheel (3).
• Remove the outer wheel (4) from the rear wheel carrier (5).
• Keep the rear wheel carrier (5) mounted.
• Check the tightness of all bolts (1) of the inner wheel (2)
through the hole in the outer wheel carrier.
• The tightening torque value for the bolts (1) is 48 Nm (35.4
lb ft).
• Mount the outer wheel (4) on the rear wheel carrier (5).
• Tighten all bolts (3) of the outer wheel (4).
• The tightening torque value for the bolts (3) is 48 Nm (35.4
lb ft).
Perform rear wheel fastening check when the machine
is parked on a flat and solid surface with the engine and
battery disconnecter off.
There is a risk of injury to people due to loose rear wheels.
If loose rear wheels are detected, perform the procedure
for fastening of the rear wheels earlier.
Wear the prescribed personal protective equipment
when checking the rear wheel fastening.