Fayat Dynapac F80W, Operating Manual

Page: 127 / 198

121 F80W
3.1.1 Safety precautions during machine
maintenance
Lubrication, maintenance and adjustment process shall be per-
formed:
• by professionally qualified and trained personnel,
• according to intervals given in the Operating Manual,
• in compliance with safety warnings given in the Operating
Manual,
• on the machine standing on a flat and solid surface and se-
cured against movement with wedge blocks, always with
the engine off, the key removed from the ignition box and
the battery disconnecter disconnected,
• with the "Machine repair" tag attached to the steering wheel
(the tag is supplied with the machine accessories),
2775
2775bz
• on cold machine parts,
• there is a danger of burning after operating fluids warm up
during certain tasks of inspection or maintenance of the ma-
chine,
• after the machine, lubrication points and maintenance plac-
es have been cleaned,
• using suitable, undamaged tools,
• by replacing parts with new original parts according to the
spare parts catalogue,
• with sufficient lighting of the entire machine during re-
duced visibility and at night,
• reinstall all removed covers and safety elements after the
work is completed,
• re-tighten bolted connections according to the specified
tightening torques.
When using a steam cleaning machine, use protective clothes
and safety glasses or a face shield and a protective helmet.
Hot steam can cause serious injuries.
Spilt fuel on a hot surface or electric parts can cause fire. Fire can
consequently cause serious injuries.
Never place your head, body and arms under the parts of the
machine which are not firmly fixed to the machine or secured
against spontaneous fall.
If you need to perform repair or maintenance in areas which are
not accessible from the ground, use ladder or a platform with
stairs which comply with respective national regulations to
reach the working area. Unless any platform with stairs or a lad-
der are available, use only handles and foot plates the machine
is equipped with. By failure to observe these rules you expose
yourself to the danger of injury by falling down of the machine.
Do not use petrol, diesel oil, thinners or other flammable liquids
to clean parts of the machine. Use approved commercial sol-
vents which are non-flammable and non-toxic.
3.1 Safety and other measures during maintenance of the machine
After the adjustment or maintenance is completed,
check all safety devices for proper operation!