Fayat Dynapac F80W, Operating Manual

Page: 106 / 198

100 F80W
451192A
39
3
2
2.6 Operation of the screed
2.6.6 Setting the end gates
The screed end gates (39) prevent the paving material from get-
ting outside the paving area.
The screed of the machine is equipped with a left and right
screed end gate (39), chains (2) and holders (3) for setting the
position of the screed end gates (48) on the left and right side
of the screed.
Procedure for setting the end gates:
• Release the chains (2) of holders (3).
• Check that the screed end gates (39) are in contact with the
ground.
• Hang the chains (2) on holders (3).
• Check that the screed end gates (39) have a sufficient play to
copy the ground profile during pacing of the material.
The end gates must be set before starting paving.
Set the end gates before starting the paving on the ma-
chine with the engine off.
There is a risk of injury from the movement of the screed.