Fayat Dynapac F80W, Operating Manual

Page: 57 / 198

51 F80W
OPERATING MANUAL
Prohibited activities during machine operation:
• Operating the machine without personal protective equip-
ment.
• Operating the machine if any defects are found, if the ma-
chine is not serviceable and if all safety conditions for ma-
chine operation are met.
• Operating the machine if its operation endangers safety of
people, its technical condition and property.
• Operating the machine if any safety devices, e.g. an emer-
gency brake of the machine, are dismounted or damaged.
• Operating the machine when any of the operating fluid lev-
els is low.
• Operating the machine with leaking oil, fuel, coolant or oth-
er operating fluid.
• Operating the machine on the slope with inclination and side
static stability higher than stated in this Operating Manual.
• Operating the machine in explosive environment.
• Starting the engine in a different way than stated in this Oper-
ating Manual.
• Using the function of the emergency brake of the machine
to switch off the engine during machine operation when
there is no danger threatening people or the machine.
• Transporting and storing tools and other objects at the driv-
er's place.
• Transporting and storing objects at places inside the ma-
chine which are not intended as deposition boxes.
• Transporting and storing cloths soaked with flammable sub-
stances and flammable liquids in/on the machine.
• Using diesel instead of an anti-adhesion solution to ensure
non-adherent surface of the hopper area.
Prohibited activities during repairs and maintenance of the
machine:
• Performing maintenance, cleaning and repairs without per-
sonal protective equipment.
• Performing maintenance, cleaning or repairs with the ma-
chine not secured against spontaneous movement or acci-
dental start, and if a person can come in contact with mov-
ing parts of the machine.
• Failing to observe prescribed machine maintenance inter-
vals.
• Failing to observe or omitting instructions at repairs and
maintenance of the machine stated in this Operating Man-
ual.
• Repairing or maintaining the engine in a different way than
according to prescribed tasks in this Operating Manual; spe-
cial repairs can only be performed by an authorised service
centre.
• Disabling safety, protective or locking systems or altering
their parameters.
• Removing impurities by high-pressure cleaners.
• Removing impurities during machine operation.
• Touching moving parts of the machine with the human
body or items and tools held in hands.
• Smoking or handling an open flame when checking and
pumping fuels, replacing or refilling operating fluids, lubri-
cating the machine, inspecting and refilling the battery.
• Only an authorized service centre can interfere in any man-
ner with electrical and electronic parts and cable harnesses,
the machine is equipped with and carry out special repairs.
• Using free connectors to connect other devices.
• Performing any modifications on the machine without the
prior written consent of the manufacturer DYNAPAC.
• Performing maintenance and repairs of the machine using
non-original parts.