Fayat Dynapac F80W, Operating Manual

Page: 56 / 198

50 F80W
2.1 Main safety precautions
2.1.18 Prohibited activities
This chapter deals with main prohibited activities during opera-
tion, work, repairs and maintenance of the machine.
Guarantee and warranty claims cannot be applied in the fol-
lowing cases:
• faulty operation of the machine,
• insufficient or incorrectly performed maintenance of the
machine,
• use of incorrect operating fluids,
• use and operation of the machine for other purposes than
the ones stated in this Operating Manual.
Failure to observe these prohibited activities may affect
potential assessment of a claim and further continuation
of warranty claims and warranty for the machine, which
has been issued by the manufacturer - DYNAPAC.
DYNAPAC does not assume any liability for addition-
ally mounted equipment which is not authorised by
DYNAPAC.
DYNAPAC assumes no responsibility in cases when the
machine is operated incorrectly by not adhering to the
instructions given in this Operating Manual, which may
result in an injury or death, damage to the machine or
property.
Prohibited activities during machine control:
• The machine operator must not operate the machine with-
out personal protective equipment.
• The machine operator must not leave the operator stand
during operation of the machine.
• The machine operator may not operate the machine if he
does not have a sufficient overview of the workplace and
potential obstacles are not clearly visible. In such cases,
a different efficient form of connection between the ap-
pointed worker and the machine operator must be ensured.
To ensure connection between the appointed worker and
the machine operator, we recommend using hand signals.
• The driver must not operate the machine under reduced vis-
ibility or at night unless the machine’s working area and the
workplace are illuminated sufficiently.
• The machine operator must not use the machine after drink-
ing alcoholic beverages and/or using drugs.
• The machine operator must not operate the machine in
a different way than stated in this Operating Manual.
• The machine operator must not transport other people on
the machine, except for people appointed by the machine
user.
• The machine operator must not operate the machine in the
protective zone of electrical grid and transformer stations
without observing respective national regulations.
• The machine operator must not cross electric cables if they
are not properly protected against mechanical damage.
• The machine operator must not leave the machine or move
away from the machine without taking measures to prevent
its operation or spontaneous movement according to this
Operating Manual.