Fayat Dynapac F80W, Operating Manual

Page: 86 / 198

80 F80W
D451053
2
1
2.5 Operation of the machine
2.5.7 Driver's stand
To access the driver's stand use only places intended for this
purpose, the footboard and the handle.
When getting on and off:
• Clean your footwear before getting on the machine.
• Always face the machine and pay increased attention dur-
ing the action.
• Always observe a safe three-point contact with the foot-
board and the handle.
Procedure for entering onto the driver's stand:
• If required, set the footboard (2) to the operating position.
• Firmly hold on to the handle (1).
• Get on the footboard (2).
• Move to the centre of the footboard (2).
• Continue to firmly hold on to the handle (1).
• During the operation of the machine always observe a safe
three-point contact with the footboard and the handle.
Jumping off the parked or moving machine is prohibited.
It is forbidden to get on or off the machine when it is
moving.
It is prohibited to use the steering wheel, control parts of
the machine or its other parts not intended for this pur-
pose for holding.
Keep the footboard and holders clean, remove any
grease, coarse dirt, ice or snow and do not place any ob-
jects on the surface. By failure to observe these rules the
danger of injury by falling down of the machine arises.
For safe movement on the machine, always use protec-
tive shoes.
During the operation of the machine always observe
a safe three-point contact with the footboard and the
handle.