Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 826 / 2254

826 ExtremeWare Software 7.3.0 Command Reference Guide
Security Commands
configure ssh2
configure ssh2 key {pregenerated}
Description
Generates the Secure Shell 2 (SSH2) host key.
Syntax Description
Default
The switch generates a key for each SSH2 session.
Usage Guidelines
Secure Shell 2 (SSH2) is a feature of ExtremeWare that allows you to encrypt session data between a
network administrator using SSH2 client software and the switch, or to send encrypted data from the
switch to an SSH2 client on a remote system. Image and configuration files may also be transferred to
the switch using the Secure Copy Program (SCP) or the Secure File Transfer Protocol (SFTP).
Before you can enable SSH2, you must first obtain a security license from Extreme Networks. After you
receive the license, you must enable SSH2 and generate a host key. To enable SSH2, use the
enable
ssh2
command. To generate an SSH2 host key, use the
configure ssh2 key
command.
An authentication key must be generated before the switch can accept incoming SSH2 sessions. This can
be done automatically by the switch, or you can enter a previously generated key.
If you elect to have the key generated, you are prompted to enter a set of random characters to be used
in generating the key. The key generation process takes approximately ten minutes, and cannot be
canceled after it has started. Once the key has been generated, you should save your configuration to
preserve the key.
To use a key that has been previously created, use the
pregenerated
keyword. You are prompted to
enter the pregenerated key. You can use the
show configure
command to list the previously generated
key, and then copy and paste it after the prompt from the configure
ssh2 key pregenerated
command.
The key generation process generates the SSH2 private host key. The SSH2 public host key is derived
from the private host key, and is automatically transmitted to the SSH2 client at the beginning of an
SSH2 session.
pregenerated Indicates that the SSH2 authentication key has already been generated. The
user will be prompted to enter the existing key.