Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 2056 / 2254

2056 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
enable wireless ports interface ap-scan off-channel
enable wireless ports <portlist> interface [1 | 2] ap-scan off-channel [at
| every] <time>
Description
Starts the access point (AP) scan on the indicated interface at the specified time.
Syntax Description
Default
N/A.
Usage Guidelines
Use this command to schedule the off-channel AP scan. During an “off-channel” scan, the Altitude 300
is not available for user traffic.
Example
The following command enables port 23 using interface 1:
enable wireless ports 23 interface 1 ap-scan off-channel at 18
History
This command was first available in ExtremeWare 6.2a and added to the “ i ” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.
at Specifies a once-only start time for a scan.
every Specifies to start the scan every day at the specified time.
time Specifies the hour in the format (0-23)