Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 2073 / 2254

show wireless ports interface ap-scan configuration
ExtremeWare Software 7.3.0 Command Reference Guide 2073
show wireless ports interface ap-scan configuration
show wireless ports [<portlist> | all] interface [1 |2] ap-scan
configuration {detail}
Description
Displays the current configuration of the scan feature for the selected ports and interface.
Syntax Description
Default
N/A.
Usage Guidelines
None.
Examples
The following example displays the configuration of port 1:5 and interface 1:
show wireless ports 1:5 interface 1 ap-scan configuration
The output of the command is similar to:
Intf En Add Rem Update Probe ProbeInt OCS Cont. Size Timeout Channels
-------------------------------------------------------------------------------
1:5:1 N off off off off 100 N N 128 300
The following example shows the extra details shown when the keyword
detail
is added to the
command:
show wireless ports 1:5 interface 1 ap-scan configuration detail
The output of the command is similar to:
Interface : 1:5:1
Enabled : N
Send Added Trap : off
Send Removed Trap : off
Send Updated Trap : off
Probe Interval : 100 (msec)
Send Probe : N
Result Table Size : 128
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all active ports.
interface Specifies an interface: 1 or 2.
detail Specifies to display the information in detailed format.