Extreme Networks ExtremeWare 7.3.0 Command Reference Manual Download Page 667

Page: 667 / 2254

delete log filter

ExtremeWare Software 7.3.0 Command Reference Guide

667

delete log filter

delete log filter [<filter name> | all]

Description

Delete a log filter with the specified name.

Syntax Description

Default

N/A.

Usage Guidelines

This command deletes the specified filter, or all filters except for the filter

DefaultFilter

. The specified

filter must not be associated with a target. To remove that association, associate the target with

DefaultFilter

instead of the filter to be deleted, using the following command:

configure log target <target> filter DefaultFilter

Example

The following command deletes the filter named

fdb2

delete log filter fdb2

History

This command was first available in ExtremeWare 7.1.0.

Platform Availability

This command is available on all platforms.

filter name

Specifies the filter to delete.

all

Specifies that all filters, except DefaultFilter, are to be deleted

Summary of Contents for ExtremeWare 7.3.0















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.3.0

Reviews:

Related manuals for ExtremeWare 7.3.0

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.3.0

Reviews:

Related manuals for ExtremeWare 7.3.0

Brands by name

Popular brands