Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 539 / 2254

disable slb node
ExtremeWare Software 7.3.0 Command Reference Guide 539
disable slb node
disable slb node [all | <ip address> : [ftp | http | https | imap4 | ldap |
nntp | pop3 | smtp | socks | telnet | tftp | web | wildcard | www | <TCP or
UDP port number>]] {close-connections-now}
Description
Disables one or all nodes.
Syntax Description
Default
N/A.
Usage Guidelines
This command stops nodes from accepting new connections; existing connections are not closed unless
you specify
close-connections-now
. SLB continues to function with other nodes.
If you disable all nodes in a pool, all virtual servers associated with that pool are effectively disabled.
To enable a node, use the following command:
enable slb node
all Specifies all nodes.
ip address Specifies an IP address.
ftp Specifies an FTP node.
http Specifies an HTTP node.
https Specifies an HTTPS node.
imap4 Specifies an IMAP4 node.
ldap Specifies an LDAP node.
nntp Specifies an NNTP node.
pop3 Specifies a POP3 node.
smtp Specifies an SMTP node.
socks Specifies a SOCKS node.
telnet Specifies a telnet node.
tftp Specifies a TFTP node.
web Specifies a Web node.
wildcard Specifies any port associated with a wildcard server.
www Specifies a www node
TCP or UDP port number Specifies a TCP or UDP port for the node.
close-connections-now Immediately closes all open connections.