Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 1613 / 2254

enable lpm
ExtremeWare Software 7.3.0 Command Reference Guide 1613
enable lpm
enable lpm
Description
Enables Selective-LPM routing.
Syntax Description
This command has no arguments or variables.
Default
Default is disabled.
Usage Guidelines
This command alters the state of the Selective-LPM routing feature (which is disabled by default). If
Accounting is disabled, non-MPLS traffic to known routes is forwarded by hardware and the MSM CPU
is used for slow-path traffic. When LPM is enabled, slow-path traffic is forwarded by the MPLS/ARM
module at a faster rate. Also, if LPM is enabled, fast-path traffic to specified vlans or route-maps can be
forwarded using longest prefix match on the module without installing IP FDB entries.
Example
The following command enables the Selective-LPM feature:
enable lpm
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.