Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 2060 / 2254

2060 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
enable wireless ports interface svp
enable wireless ports [<portlist> | all] interface [1 | 2] svp
Description
Enables the QoS protocol, SpectraLink Voice Protocol (SVP), for VoIP on the specified port and interface.
Syntax Description
Default
Disabled.
Usage Guidelines
Use this command to implement the QoS protocol for VoIP. By enabling QoS for VoIP, you give voice
traffic a higher priority than data traffic. VoIP traffic has less tolerance for error recovery than data.
Although voice traffic can tolerate some degree of error recovery, it can be noticeable to users. This
command allows you to enable QoS for VoIP on the port and interface level.
Example
The following example, turns on SVP on port 17 and interface 1:
enable wireless ports 17 interface 1 svp
History
This command was first available in ExtremeWare 6.2a and added to the “ i ” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
all Specifies all ports.
interface Specifies an interface: 1 or 2.