Extreme Networks ExtremeWare 7.3.0 Command Reference Manual Download Page 454

Page: 454 / 2254

454

ExtremeWare Software 7.3.0 Command Reference Guide

SLB Commands

configure slb failover alive-frequency

configure slb failover alive-frequency <seconds> timeout <seconds>

Description

Configures the frequency at which the local SLB device polls the remote SLB device.

Syntax Description

Default

The default alive frequency is 1 second.

The default timeout is 3 seconds.

Usage Guidelines

The frequency must be less than the timeout. Extreme Networks recommends that you set the timout
greater than an even multiple of the frequency.

To enable active-active operation, use the following command:

enable slb failover

Example

The following command sets the alive frequency to 5 seconds and the timeout to 10 seconds:

configure slb alive-frequency 5 timeout 10

History

This command was first available in ExtremeWare 6.1.

Platform Availability

This command is available on all platforms.

alive-frequency

The frequency at which the local SLB device polls the remote SLB device.
The range is 1 to 60.

timeout

The amount of time within which the local switch must receive a response
from the remote switch. The range is 1 to 60.

Summary of Contents for ExtremeWare 7.3.0















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ExtremeWare 7.3.0

Reviews:

Related manuals for ExtremeWare 7.3.0

Brands by name

Popular brands

Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Search results

Summary of Contents for ExtremeWare 7.3.0

Reviews:

Related manuals for ExtremeWare 7.3.0

Brands by name

Popular brands