Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 891 / 2254

enable access-list
ExtremeWare Software 7.3.0 Command Reference Guide 891
enable access-list
enable access-list <name> [counter | log]
Description
Enables message logging or the collection of access-list statistics.
Syntax Description
Default
Counting is ON, logging is OFF.
Usage Guidelines
None.
Example
The following command enables statistics collection for access list allow102 :
enable access-list allow102 counter
The following command enables logging of packets for access list allow102 :
enable access-list allow102 log
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on all platforms.
name Specifies the name of the access list.
counter Specifies that access-list statistics should be collected.
log Specifies that a message should be logged to the Syslog facility for each
packet that matches the access-list description. The message details the
properties of the packet.