Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 363 / 2254

create fdbentry vlan dynamic
ExtremeWare Software 7.3.0 Command Reference Guide 363
• A port goes down (link down).
Using the
any-mac
keyword, you can enable traffic from a QoS VLAN to have higher priority than
802.1p traffic. Normally, an 802.1p packet has a higher priority over the VLAN classification. To use this
feature, you must create a wildcard permanent FDB entry named
any-mac
and apply the QoS profile to
the individual MAC entry.
You can use the
show fdb permanent
command to display permanent FDB entries, including their QoS
profile associations.
Example
The following example associates the QoS profile qp2 with a dynamic entry for MAC address
00:A0:23:12:34:56 on VLAN net34 that will be learned by the FDB:
create fdbentry 00:A0:23:12:34:56 vlan net34 dynamic qosprofile qp2
QoS profile qp2 will be applied when the entry is learned.
The following example associates the QoS profile qp5 with the wildcard permanent FDB entry any-mac
on VLAN v110:
create fdbentry any-mac vlan v110 dynamic ingress-qosprofile qp5
History
This command was available in ExtremeWare 2.0.
Support for associating separate QoS profiles with ingress and egress ports was added in ExtremeWare
6.2.
This command was modified in ExtremeWare 6.2.1 to support the
broadcast-mac
option.
Platform Availability
This command is available on all platforms.