Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 94 / 2254

94 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Accessing the Switch
reboot
reboot {time <date> <time> | cancel} {slot <slot number> | msm-a | msm-b}
Description
Reboots the switch or the module in the specified slot at a specified date and time.
Syntax Description
Default
N/A.
Usage Guidelines
If you do not specify a reboot time, the switch will reboot immediately following the command, and
any previously scheduled reboots are cancelled. To cancel a previously scheduled reboot, use the
cancel
option.
The
slot <slot number>
option is added to the command to make it possible to reboot a module in a
specific slot. When you specify this option, the command applies to the module in the specified slot,
rather than to the switch. In general, the modules that can be rebooted have separate images from the
ExtremeWare image for the switch.
The modules that can be rebooted are: E1, T1, T3, ARM, ATM, MPLS, PoS, and slave or switch fabric
MSM modules.
NOTE
When you configure a timed reboot of an MSM, there is no show output in the CLI to view the
configuration.
The E1, T1, and T3
reboot slot
command does not support the
time
or
cancel
keywords, so this
command can only be executed immediately.
Example
The following command reboots the switch at 8:00 AM on April 15, 2002:
reboot 04/15/2002 08:00:00
The following command reboots the MPLS module in slot number 5:
date Specifies a reboot date in
mm/dd/yyyy
format.
time Specifies a reboot time in
hh:mm:ss
format.
cancel Cancels a previously scheduled reboot.
slot number Specifies the slot where the module is installed.
msm-a Specifies a BlackDiamond MSM module installed in slot A.
msm-b Specifies a BlackDiamond MSM module installed in slot B.