Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 155 / 2254

configure snmpv3 engine-id
ExtremeWare Software 7.3.0 Command Reference Guide 155
configure snmpv3 engine-id
configure snmpv3 engine-id <hex octet>
Description
Configures the SNMPv3 snmpEngineID.
Syntax Description
Default
The default
snmpEngineID
is the device MAC address.
Usage Guidelines
Use this command if the
snmpEngineID
needs to be explicitly configured. The first four octets of the ID
are fixed to 80:00:07:7C,which represents Extreme Networks Vendor ID. Once the
snmpEngineID
is
changed, default users will be reverted back to their original passwords/keys, while non-default users
will be reset to the security level of no authorization, no privacy.
In a chassis, the
snmpEngineID
will be generated using the MAC address of the MSM with which the
switch boots first. For MSM hitless failover, the same
snmpEngineID
will be propagated to both of the
MSMs.
Example
The following command configures the
snmpEngineID
to be 80:00:07:7C:00:0a:1c:3e:11:
configure snmpv3 engine-id 00:0a:1c:3e:11
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.
hex octet Specifies the colon delimited hex octet that serves as part of the
snmpEngineID (5-32 octets).