Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 55 / 2254

ExtremeWare Software 7.3.0 Command Reference Guide 55
Preface
This preface provides an overview of this guide, describes guide conventions, and lists other
publications that may be useful.
Introduction
This guide provides the complete syntax for all the commands available in the currently-supported
versions of the ExtremeWare
®
software running on either modular or stand-alone switches from
Extreme Networks
®
. This also includes commands that support specific modules such as the ARM,
MPLS or PoS modules.
This guide is intended for use as a reference by network administrators who are responsible for
installing and setting up network equipment. It assumes knowledge of Extreme Networks switch
configuration. For conceptual information and guidance on configuring Extreme Networks switches, see
the
ExtremeWare Software User Guide for your version of the ExtremeWare software.
Terminology
When features, functionality, or operation is specific to a modular or stand-alone switch family, the
family name is used. Explanations about features and operations that are the same across all product
families simply refer to the product as the “switch.”
Conventions
and list conventions that are used throughout this guide.
Table 1: Notice Icons
Icon Notice Type Alerts you to...
Note Important features or instructions.
Caution Risk of personal injury, system damage, or loss of data.