Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 2032 / 2254

2032 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
configure wireless ports interface security-profile
configure wireless ports <portlist> interface [1 | 2] security-profile
<name>
Description
Attaches a port or ports and interface to a security profile.
Syntax Description
Default
Unsecure.
Usage Guidelines
Each wireless port on the Alpine 3800 contains two interfaces. Interface 1 supports 802.11a, and interface
2 supports 802.11b/g radio signals. The
configure wireless port interface
command allows you
to configure one of the two individual interfaces (1|2) on a port or ports.
All ports in the port list must have the same wireless port version.
Example
The following command attaches the security profile secure-wep to interface 1 on port 1:7:
configure wireless port 1:7 interface 1 security-profile secure-wep
History
This command was first available in ExtremeWare 6.2a and added to the “ i ” series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
portlist Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
interface Specifies an interface: 1 or 2.
name Specifies the name of the profile.