Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 1846 / 2254

1846 ExtremeWare Software 7.3.0 Command Reference Guide
MPLS Commands
show mpls tls-tunnel
show mpls tls-tunnel {summary | detail | <tunnel_name> {detail} | vlan
<vlan_name> {detail}}
Description
Displays configuration and status information for TLS tunnels.
Syntax Description
Default
N/A.
Usage Guidelines
This command displays configuration and status information for one or all TLS tunnels. The
information displayed for each tunnel includes:
• The values of all configuration parameters for the tunnel.
• The current status of the tunnel LSP.
• Transmit and receive counts in terms of packets and bytes.
If the optional
detail
keyword is specified, TLS tunnel information is displayed using the
comprehensive detail format.
If the optional
summary
keyword is specified, summary TLS tunnel counts are displayed. The summary
counters displayed include the total number of active static and dynamic TLS tunnels.
Example
The following command displays configuration and status information for the TLS tunnel rt40 :
show mpls tls-tunnel rt40
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the BlackDiamond switch only.
summary Specifies to display summary TLS tunnel counts.
detail Specifies to display the information in detailed format.
tunnel_name Specifies a TLS tunnel name.
vlan_name Specifies a VLAN name.