Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 1362 / 2254

1362 ExtremeWare Software 7.3.0 Command Reference Guide
IGP Commands
enable ospf export static
enable ospf export static [cost <metric> [ase-type-1 | ase-type-2] {tag
<number>} | <route map>]
Description
Enables the redistribution of static routes to OSPF.
Syntax Description
Default
The default tag number is 0. The default setting is disabled.
Usage Guidelines
After it is enabled, the OSPF router is considered to be an ASBR.
This command enables the redistribution of static routes by way of LSA to other OSPF routers as
AS-external type 1 or type 2 routes.
The cost metric is inserted for all BGP, VIP, RIP-learned, static, and direct routes injected into OSPF. The
tag value is used only by special routing applications. Use 0 if you do not have specific requirements for
using a tag. The tag value in this instance has no relationship with 802.1Q VLAN tagging.
Example
The following command enables the exporting of static routes to OSPF:
enable ospf export static cost 0 ase-type-1 tag 0
History
This command was first available in ExtremeWare 4.0.
Platform Availability
This command is available on all platforms.
metric Specifies a cost metric.
ase-type-1 Specifies AS-external type 1 routes.
ase-type-2 Specifies AS-external type 2 routes.
number Specifies a tag value.
route map Specifies a route map name.