Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 126 / 2254

126 ExtremeWare Software 7.3.0 Command Reference Guide
Commands for Managing the Switch
• The default groups defined (permanent) are v1v2c_ro for security names snmpv1 and snmpv2c ,
v1v2c_rw for security names snmpv1 and snmpv2c , admin for security name admin , and initial for
security names initial , initialmd5 , initialsha , initialmd5Priv and initialshaPriv .
• The default access defined (permanent) are admin , initial , v1v2c_ro , v1v2c_rw , and v1v2cNotifyGroup.
Example
In the following command, access for the group defaultROGroup is created with all the default values:
security model
usm
, security level
noauth
, read view defaultUserView , no write view, notify view
defaultUserView , and storage nonvolatile.
configure snmpv3 add access defaultROGroup
In the following command, access for the group defaultROGroup is created with the values: security
model
USM
, security level
authnopriv
, read view defaultAdminView , write view defaultAdminView , notify
view defaultAdminView , and storage nonvolatile.
configure snmpv3 add access defaultROGroup sec-model usm sec-level authnopriv
read-view defaultAdminView write-view defaultAdminView notify-view defaultAdminView
History
This command was first available in ExtremeWare 7.1.0.
Platform Availability
This command is available on all platforms.