Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 1604 / 2254

1604 ExtremeWare Software 7.3.0 Command Reference Guide
ARM Commands
configure route-map set accounting-index 1 value
configure route-map <route-map> <sequence_number> [add | delete] set
accounting-index 1 value <bin_number>
Description
Configures the accounting bin number to be associated with the specified route map entry.
Syntax Description
Default
N/A.
Usage Guidelines
• The accounting-index value is always set to 1 for destination-sensitive accounting.
• The
route-map
parameter identifies a particular route map.
• The
sequence_number
parameter identifies a specific entry in that route map. The sequence number
must be associated with a match statement.
• The
set accounting-index 1 value
keyword phrase indicates that the following parameter is an
accounting bin number.
• The
bin_number
parameter is an integer between 0—7, and allows you to define the accounting bin
number.
Example
The following command configures the accounting bin number to be associated with the specified route
map entry:
configure route-map rt40 11 add set accounting-index 1 value 5
History
This command was first available in an ExtremeWare IP Technology Services Release based on
v6.1.8b12.
route-map Specifies a route map.
sequence number Specifies a specific entry in the route map.
add Specifies to add the statement to the route map.
delete Specifies to delete the statement from the route map.
bin_number Specifies an accounting bin number.
Table 28: Set Operation Keywords
Command Description of Change
accounting-index <index> value
<value> Sets the accounting bin number for the route-mapped accounting index. The
accounting index value is always set to 1 for destination-sensitive accounting.