Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 2064 / 2254

2064 ExtremeWare Software 7.3.0 Command Reference Guide
Wireless Commands
show rf-profile
show rf-profile {<profile_name>}
Description
Displays configuration attributes for a particular RF profile or all RF profiles.
Syntax Description
Default
All.
Usage Guidelines
Use this command to display configuration attributes for a particular RF profile or all RF profiles. If you
do not enter an RF profile name, configuration attributes will be displayed for all RF profiles.
Example
The following command displays configuration information about the RF profile named rfprof_alpha :
show rf-profile rfprof_alpha
The output from this command is similar to:
Profile Name: rfprof_alpha
Mode: G
Beacon Interval: 1000
DTIM: 100
Fragmentation Length: 2345
RTS Threshold: 2330
Preamble: Long
Short Retry: 4
Long Retry: 7
No interfaces bound to this RF profile
The following command displays configuration information about all RF profiles:
show rf-profile
The output from this command is similar to:
Profile Name: DEFAULT_A
Mode: A
Beacon Interval: 40
DTIM: 2
Fragmentation Length: 2345
RTS Threshold: 2330
Preamble: Short
profile_name Specifies the name of the RF profile whose configuration is to be displayed. If
you do not enter an RF profile name, configuration attributes will be displayed
for all RF profiles.