Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 403 / 2254

enable dlcs
ExtremeWare Software 7.3.0 Command Reference Guide 403
enable dlcs
enable dlcs {fast-ethernet-ports | ports [all | <port_number>]}
Description
This command enables WINS snooping for ports on the switch.
Syntax Description
Default
Enables snooping on all ports.
Usage Guidelines
DLCS must be enabled to allow usage of DLCS information by the ExtremeWare Enterprise Manager
Policy System.
enable dlcs
used with no parameters is the same as
enable dlcs ports all
.
The
fast-ethernet-ports
parameter is a shortcut to enable DLCS on all Fast Ethernet ports, rather
than having to enter each port individually.
Example
The following command enables DLCS snooping on port 4:
enable dlcs ports 4
Either of the following commands enable DLCS snooping on all ports:
enable dlcs
enable dlcs ports all
History
This command was available in ExtremeWare 6.0.
The command was modified in ExtremeWare 6.1 to support the
fast-ethernet-ports
parameter.
Platform Availability
This command is available on all platforms.
fast-ethernet-ports Specifies that WINS packets should be snooped on all Fast Ethernet ports.
all Specifies that WINS packets should be snooped on all ports.
port_number Specifies a port on which WINS packets are to be snooped.