Extreme Networks ExtremeWare 7.3.0, Command Reference Manual

Page: 749 / 2254

unconfigure log target format
ExtremeWare Software 7.3.0 Command Reference Guide 749
unconfigure log target format
unconfigure log target [console-display | memory-buffer | nvram | session |
syslog [<host name/ip> {:<udp-port>} [local0 ... local7]]] format
Description
Resets the log target format to its default values.
Syntax Description
Default
When a target format is unconfigured, it is reset to the default values.
The following defaults apply to console display, memory buffer, NVRAM, and session targets:
• timestamp—hundredths
• date—mm-dd-yyyy
• severity—on
• event-name—condition
• host-name—off
• priority—off
• tag-id—off
• tag-name—off
• sequence-number—off
• process-name—off
• process-id—off
• source-function—off
• source-line—off
The following defaults apply to syslog targets (per RFC 3164):
• timestamp—seconds
• date—mmm-dd
console-display Specifies the console display format.
memory-buffer Specifies the switch memory buffer format.
nvram Specifies the switch NVRAM format.
session Specifies the current session (including console display) format.
syslog Specifies a syslog target format.
host name/ip Specifies the syslog host name or IP address.
udp-port Specifies the UDP port number for the syslog target.
local0 ... local7 Specifies the local syslog facility.
format Specifies that the format for the target will be reset to the default value.