ENVR208
Figure 11-3
Set Motion Detection
Step 2
Select the camera to configure the motion detection.
Step 3
Check
Enable
.
Step 4
Set the motion detection area.
⚫
Full screen: click to set the full-screen motion detection for the image.
⚫
Customized area: use the mouse to click and drag on the preview screen to draw the
customized motion detection area (s).
You can click
Clear
to clear the current motion detection area settings and draw again.
Step 5
Set sensitivity (0-100). The sensitivity allows you to calibrate how readily movement triggers the
alarm. The higher value results in the more readily to trigger the motion detection.
Step 6
Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.
Step 7
Set the linkage actions. Refer to Chapter 11.2 Configure Alarm Linkage Actions.
Summary of Contents for ENVR208
