ENVR208
Step 2
Select the
PTZ Linkage
.
Step 3
Select the camera to perform the PTZ actions.
Step 4
Select the preset/patrol/pattern No. to call when the alarm events occur.
Figure 11-11
PTZ Linkage
You can set one PTZ type only for the linkage action each time.
11.8 Trigger or Clear Alarm Output Manually
Purpose:
Sensor alarm can be triggered or cleared manually. When the
Manually Clear
is selected for the
dwell time of an alarm output, the alarm can be cleared only by clicking
Clear
button.
Step 1
Go to
System
>
Event
>
Normal Event>Alarm Output
.
Step 2
Select the alarm output you want to trigger or clear.
Step 3
Click
Trigger/Clear
to trigger or clear an alarm output.
Summary of Contents for ENVR208
