ENVR208
7.12 Configure Redundant Recording and Capture
Purpose:
Enabling redundant recording and capture, which means saving the record files and captured
pictures not only in the R/W HDD but also in the redundant HDD, will effectively enhance the data
safety and reliability.
You must set the storage mode to
Group
before you set the HDD property to Redundancy. For
detailed information, please refer to Chapter 7.2.1 Configure HDD Group. There should be at least
another HDD which is in Read/Write status.
Step 1
Go to
Storage
>
Storage Device
.
Step 2
Select a
HDD
from the list and Click
to enter the Local HDD Settings interface.
Step 3
Set the HDD property to
Redundancy
.
Figure 7-13
HDD Property-Redundancy
Step 4
Go to
Storage
>
Schedule Settings > Record Schedule
/
Capture Schedule
.
Step 5
Click
Advanced
to set the camera recording parameters.
Summary of Contents for ENVR208
