ENVR208
3.2.2 Add Non-PoE IP Cameras
You can disable the PoE interface by selecting the manual while the current channel can be used as
a normal channel and the parameters can also be edited.
Step 1
Go to
Camera > Camera > IP Camera
.
Step 2
Position the cursor on a window with no linked IP camera and click the
button.
Figure 3-3
Edit IP Camera
Step 3
Select Adding Method as
Manual
.
•
Plug-and-Play:
The camera is physically connected to the PoE interface. Its parameters
cannot be edited. You can go to
System > Network > TCP/IP
to change IP address of PoE
port.
•
Manual:
Add IP camera without physical connection via network.
Step 4
Enter the IP address, the user name and password of administrator manually.
Step 5
Click
OK
.
3.2.3
Configure PoE Interface
Purpose:
When it requires long-distance PoE transmission (100 to 300 m), you can enable long distance
mode for the PoE channel.
Step 1
Go to
Camera > Camera >PoE Settings
.
Step 2
Enable or disable long network cable mode by selecting
Long Distance
or
Short Distance
radio.
⚫
Long Distance
: Long-distance (100 to 300 meters) network transmissions via POE interface.
Summary of Contents for ENVR208
