ENVR208
7.3.3 Picture
The picture refers to the live picture capture in continuous or event recording type.
Picture Quality
: set the picture quality to low, medium or high. The higher picture quality results
in more storage space requirement.
Interval
: the interval of capturing live picture.
7.3.4 ANR
ANR (Automatic Network Replenishment) function which enables the IP camera to save the
recording files in the local storage when the network is disconnected, and when the network is
resumed, it uploads the files to the device.
Enable the ANR (Automatic Network Replenishment) function via the web browser
(
Configuration
>
Storage
>
Schedule Settings
>
Advanced
).
7.3.5 Configure Advanced Recording Settings
Step 1
Go to
Storage
>
Schedule Settings > Record Schedule
/
Capture Schedule
.
Step 2
Check the checkbox of
Enable
to enable scheduled recording.
Step 3
Click
Advanced
to set the recording parameters.
Figure 7-8
Advanced Record Settings
Record Audio
: Check the checkbox to enable or disable audio recording.
Pre-record
: The time you set to record before the scheduled time or event. For example, when
an alarm triggers the recording at 10:00, and if you set the pre-record time as 5 seconds, the
camera records at 9:59:55.
Post-record:
The time you set to record after the event or the scheduled time. For example,
when an alarm triggered recording ends at 11:00, and if you set the post-record time as 5
seconds, it records till 11:00:05.
Summary of Contents for ENVR208
