ETC Emphasis Lighting Control System, User Manual

Page: 167 / 292

7
Macros 157
Add a label to a macro:
Step 1: Press [Setup] [6] [Enter] to display the Macro List.
Step 2: Type the macro number on the numeric keypad and press [Enter] . You can use
[And] and [Thru] to select multiple macros.
N o t e :
You can also select macros for viewing and editing using the mouse in Emphasis
Visualization. Simply click the macro number or label in the Console Screens, Console
or Monitor layout.
Step 3: Press [Label] or [S2 - Label] and type the label. If a label exists for that macro,
press F6 to clear the label from the cursor position to the end.
Step 4: If you want to continue labeling macros, press F7 to move up to the previous
macro, F8 to advance to the next available macro. If you are done, press [Enter]
to complete your label.
Copy macros:
Step 1: Press [Setup] [6] [Enter] to display the Macro List.
Step 2: Press [S7 - Copy Macro] .
Step 3: Type the macro number on the numeric keypad and press [Enter] .
N o t e :
You can also select macros for viewing and editing using the mouse in Emphasis
Visualization. Simply click the macro number or label in the Console Screens, Console
or Monitor layout.
Step 4: Type the macro number on the numeric keypad and press [Enter] . If the target
macro already exists, you will have to press [Enter] again to confirm that you
really want to copy over it.