ETC Emphasis Lighting Control System, User Manual

Page: 139 / 292

5
Blind Editing 129
Edit submaster attributes within the Submaster List display:
Step 1: Press [Blind] . The Blind display defaults to cues.
Step 2: Press [Sub] [Enter] to view submasters in Blind.
Step 3: Press [S2 - Sub List] to display the Submaster List.
Step 4: Press [ x ] [Enter] to select submaster [x]. You can also use [And] , [Thru] and
[Except] to select multiple submasters. You may also use the up- and down-
arrow ( [
v
] and [
u
] ) keys to scroll through the Submaster List.
Step 5: Press:
•
[S1 - Bump Status] to change the status of the submaster(s) bump button.
Press [1] [Enter] to enable the sub bump for normal operation , [2] [Enter]
to disable the sub bump entirely (a “D” is displayed in the column), or [3]
[Enter] to enable Solo operation for the selected submaster(s). Solo
operation causes channels not contained in the submaster to go to zero
when the sub’s bump button is pressed.
• [Time] to change the upfade time for the selected submaster(s). See Time
Functions, page 98 .
• [Time] [Time] to change the dwell time for the selected submaster(s).
• [Time] [Time] [Time] to change the downfade time for the selected
submaster(s).
• [Type] to change the type for the selected submaster(s). See Submaster
Types, page 94 .
• [S3 - Rate] to change the rate setting for the selected submaster(s). See
Rate, page 99 .
• [Label] to add a label to the selected submaster(s). See Label, page 103 .
• Alternatively, you can press the right- and left-arrow ( [
t
] and [
s
] ) keys to
move through the Submaster List columns. The prompt area will display
instructions for setting each available attribute as you move from column to
column.
Delete submasters within the Submaster List display:
Step 1: Press [Blind] . The Blind display defaults to cues.
Step 2: Press [Sub] [Enter] to view submasters in Blind.
Step 3: Press [S2 - Sub List] to display the Submaster List.
Step 4: Press [S6 - Delete Sub] .
Step 5: Press [ x ] to select submaster [x]. You can also use [And] , [Thru] and [Except]
to select multiple submasters.
Step 6: Press [Enter] to delete the selected submaster(s). To abort the delete command,
press [Clear] .
Step 7: Press [Enter] to confirm that you really want to delete the submaster(s).