ETC Emphasis Lighting Control System User Manual Download Page 42

Page: 42 / 292

Emphasis Console v1.4.0 User Manual

Patch

The Patch display is used to apply profiles and proportional levels to patched dimmers (see

Patch, page 61

). You can also use the Patch display to patch dimmers to channels,

however it is highly recommended that you use Emphasis Visualization to patch your

channels. You must use Emphasis Visualization to create a moving light patch in

Emphasis.

Park

The Park display is accessed by a hard key on Expression and Insight facepanels, and by

a softkey on Express facepanels. The Park display is used to view and edit parked channels

and parked dimmers. A parked channel or dimmer stays at the parked level until it is

unparked. For more information on parking channels and dimmers, see

Park, page 85

Summary of Contents for Emphasis Lighting Control System





































































































































































































































































































Search results

Summary of Contents for Emphasis Lighting Control System

Reviews:

Related manuals for Emphasis Lighting Control System

Brands by name

Popular brands

ETC Emphasis Lighting Control System, User Manual

Search results

Summary of Contents for Emphasis Lighting Control System

Reviews:

Related manuals for Emphasis Lighting Control System

Brands by name

Popular brands