ETC Emphasis Lighting Control System, User Manual

Page: 65 / 292

3
System Settings 55
channel, while the higher channel number is the low, or fine movement, channel).
Channels set to 16-Bit are indicated by “Hi” and “Lo”. Use
[S3 - 16 Bit] to edit this
setting for selected channels.
• LTP - LTP is described in LTP, page 43 , and is indicated by a “y” in this column. Use
[S6 - LTP] to edit this setting for selected channels.
• Label - You can assign labels to channels, if you wish. Use [Label] and the
alphanumeric keyboard to edit this setting for selected channels. When complete,
press
[Enter] .
N o t e :
Label can be found on <S7 - More Softkeys> [S2 - Label] on Express facepanels.
Edit channel attributes:
Step 1: On your Emphasis Facepanel or from the virtual facepanel in Emphasis
Visualization, press [Setup] [9] [Enter] to access the Channel Attributes display.
Step 2: Select a channel by typing the channel number on the numeric keypad or by
scrolling through the channel list using the arrow keys. Select channel ranges
using the numeric keypad and the [And] , [Thru] , and [Except] keys.
Step 3: Press the softkey that corresponds to the attribute you want to change, or use
the right- and left-arrow (
[
t
] and [
s
] ) keys to scroll to the attribute’s column.
Step 4: Following the prompt above the softkeys, press [1] to enable or [0] to disable the
attribute you’ve chosen.
Profiles
The Profiles menu is described in Dimmer Profiles, page 63 .