ETC Emphasis Lighting Control System, User Manual

Page: 128 / 292

118 Emphasis Console v1.4.0 User Manual
Style Steps
The following style steps are available in subroutine cues:
• Loop to Step . . . . The subroutine runs through steps until it encounters a loop to
step style step. You can set which step to loop back to and how
many times to run the loop.
• Bounce . . . . . . . . . The subroutine runs through steps until it encounters a bounce
style step. The subroutine will then run backwards through the
steps until it reaches the first step and then starts again. The
subroutine will bounce for the number of times you set in the
bounce step (one bounce equals one pass forward and one pass
backward).
• Jump to Cue . . . . The subroutine runs through steps until it encounters a jump to
cue style step. It then exits the subroutine and automatically starts
another cue in the main cue list.
• Hold for Go . . . . . The subroutine runs through steps until it encounters a hold for go
style step. It then pauses until you press [Go] .
• Filter . . . . . . . . . . . Filter steps are usually placed in the first step of the subroutine. A
filter determines which channels will respond to subroutine
commands. A filter of group “0” includes all patched channels. Any
other group can be used to limit playback to the channels recorded
in the group. Only one group may be entered in this step.
• Macro . . . . . . . . . . A macro step executes a macro from within a subroutine.
Dynamic settings
displayed in purple.
Fixed settings
displayed in grey.