ETC Emphasis Lighting Control System, User Manual

Page: 96 / 292

86 Emphasis Console v1.4.0 User Manual
Park Channels
You can park channels at direct levels, or with reference to a focus point. Channels parked
at a focus point will update their parked level if the corresponding focus point is changed.
See Focus Points, page 81 for more information.
Park channels at direct levels:
Step 1: In the Stage display, press <S7 - More Softkeys> [S6 - Park] . In the Park
display, you do not need to press a softkey before selecting channels.
Step 2: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 72 .
Step 3: If selected channels are not already at the levels you require, press [At] [ x ] ,
where [ x ] is the level you desire. If they are at the levels you require, skip this
step.
Step 4: Press [Enter] to park the channels. In the Park display, channels will display the
level they are parked to.
Park channels at focus points:
Step 1: In the Stage display, press <S7 - More Softkeys> [S6 - Park] . In the Park
display, you do not need to press a softkey before selecting channels.
Step 2: Select channels using the procedure described in Select Channels, Dimmers
and Fixtures, page 72 .
Step 3: Press [Focus Point] [ x ] , where [ x ] is the number of the focus point.
Step 4: Press [Enter] to park the channels. In the Park display, channels will display the
level they are parked to and the focus point number they are referencing.
Park Groups, Focus Points, Cues and Submasters
You can park channels at levels based upon recorded groups, focus points, cues and
submasters. When you park based upon recorded levels, you have the option of parking at
the recorded levels, or at a proportional level.
Park channels relative to recorded levels:
Step 1: In the Stage display, press <S7 - More Softkeys> [S6 - Park] . In the Park
display, you do not need to press a softkey before selecting channels.
Step 2: Press [Group] [ x ] , where [ x ] is the group number. [Group] can be replaced with
[Cue] , [Sub] or [Focus Point] as needed.
Step 3: Press [Full] to park at recorded levels, or press [At] [ y ] , where [ y ] is the
proportional level. For example, channel 1 is recorded into group 1 at full (100%).
You park [Group] [1] [At] [5][0] . Channel 1 will park at 50%.