ETC Emphasis Lighting Control System, User Manual

Page: 140 / 292

130 Emphasis Console v1.4.0 User Manual
Submaster Spreadsheet
In the Submaster Spreadsheet, you can see channel levels for all pile-on submasters on a
page in a spreadsheet layout. You cannot view the contents of effect or subroutine
submasters, but you can see the submaster type setting. Inhibitive submasters display “IN”
for channels recorded to them. You can edit or delete submasters one at a time, or by
selecting ranges. Using the replace level feature, you can change channels at one level to
a new level, without having to select them individually.
C A U T I O N :
Unlike the Stage and Blind displays, changes made in the spreadsheet are
recorded immediately without the need for the additional [Record] command.
Changes made in the spreadsheet will be stored, but will not update levels on stage
until you move the submaster fader to zero and back to a level. The submaster LED
will blink to indicate that the active submaster has been changed.
Edit submasters in the spreadsheet display:
Step 1: Press [Blind] . The Blind display defaults to cues.
Step 2: Press [Sub] [Enter] to view submasters in Blind.
Step 3: Press [S3 - Spread Sheet] to display the submaster spreadsheet.
Step 4: Press [ x ] to select submaster [x]. You can also use [And] , [Thru] and [Except]
to select multiple submasters.
Step 5: Press [Channel] [ y ] to select channel [y]. You can also use [And] , [Thru] and
[Except] to select multiple channels.
Step 6: Press [At] [ z ] to change levels for the selected channel(s) in the selected cue(s)
to level [z]. To remove levels from a submaster, press [At] [Clear] .
N o t e :
To deselect channels after pressing [At] , but before entering a new level, simply press
[Channel] or [Sub] .