ETC Emphasis Lighting Control System, User Manual

Page: 169 / 292

7
Macros 159
A Key List is provided to facilitate the entry of ETCLink commands and commands typically
found on softkeys. Use [S6 - Key List Help] to get a help message for any command in the
Key List.
N o t e :
The <S7 - More Softkeys> command cannot be entered in a macro in the Macro Editing
display. If you are creating a macro to page to a certain group of softkeys, use the [Learn]
command to create the macro.
Create a macro in the Macro Editing display:
Step 1: Press [Setup] [6] [Enter] to display the Macro List.
Step 2: Type the macro number on the numeric keypad and press [Enter] .
Step 3: Press [S1 - Edit Macro] to access the Macro Editing display.
Step 4: Press:
•
Facepanel keys to insert commands.
• [S8 - Key List] to insert softkey and ETCLink commands. In the Key List, use
[S4 - Previous Page] or [S5 - Next Page] to move through the pages of
available commands. Commands are listed alphabetically, not by softkey
number. Type the command number and press [Enter] . Press [S8 - Return]
to return to the Macro Editing display.
Step 5: Press [Enter Macro] to record your macro.
N o t e :
To have a macro fire another macro, simply press the macro key, or the [M*] key, the
macro number and [Enter] . Linked macros must fall at the end of the list of commands.