ETC Emphasis Lighting Control System User Manual Download Page 228

Page: 228 / 292

218

Emphasis Console v1.4.0 User Manual

Step 7:

Click Unzip to extract the software onto the floppy disk.

Step 8:

Click OK when completed.

Step 9:

Close the WinZip window and the Facepanel Software window.

Step 10: Eject the floppy disk from the Emphasis Server.

Install v3.1 Console Software

When the console is turned on with the v3.1 Console Software Disk inserted in the

Facepanel disk drive, the software loads immediately.

Install v3.1 software:

Step 1:

Turn the facepanel off.

Step 2:

Insert the v3.1 Facepanel Console Disk into your facepanel’s diskette drive.

Step 3:

Turn the facepanel back on. The console displays the boot screen and

automatically installs the software. This process takes approximately one

minute. The console displays the following messages as the installation

progresses:

Loading

Erasing Flash

Writing Flash

. Wait until the Stage

display appears.

Step 4:

Press [Setup] to confirm that the new software has been successfully installed.

The current software version (Express/ion 3 Version 3.1) is displayed in the lower

right corner of the display.

Step 5:

Remove the diskette from the disk drive and store.

Summary of Contents for Emphasis Lighting Control System





































































































































































































































































































Search results

Summary of Contents for Emphasis Lighting Control System

Reviews:

Related manuals for Emphasis Lighting Control System

Brands by name

Popular brands

ETC Emphasis Lighting Control System, User Manual

Search results

Summary of Contents for Emphasis Lighting Control System

Reviews:

Related manuals for Emphasis Lighting Control System

Brands by name

Popular brands