ETC Emphasis Lighting Control System, User Manual

Page: 142 / 292

132 Emphasis Console v1.4.0 User Manual
Supermasters
Submasters may be set as Supermasters. A Supermaster masters a number of assigned
submasters. When you press the bump button for a Supermaster, you are pressing the
bump buttons for all associated submasters.
To create a Supermaster:
Step 1: Press [Blind] . The Blind display defaults to cues.
Step 2: If required, press [Page] [ x ] [Enter] to select the submaster page you want to
view. There are ten pages available.
Step 3: Press [Sub] [ y ] [Enter] to select submaster [y]. You can also use the [+] and
[-] keys to increment and decrement through the submasters on the current
submaster page.
Step 4: Press [Type] [5] [Enter] to set the Supermaster type.
Step 5: Press [ z ] to select submaster [z]. You can also use [And] , [Thru] and [Except]
to select multiple submasters.
Step 6: Press
[
t
] [1]
to enable the assignment. Press [0] to disable the assignment.
Inhibitive submasters and other Supermasters will not be affected by a
Supermaster.
Step 7: Repeat steps 5 and 6 until you have assigned all the submasters you want to the
Supermaster.
Step 8: Press [Record] [Enter] to record the Supermaster. You can also press [Record]
and a submaster bump button to record these settings to another submaster.