Epson S5U1C17001C, Manual

Page: 364 / 742

5-242
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
5 gnU17 iDE
5.11 files generated in a Project by the iDE
Table 5.11.1 List of files generated by the iDE
Filename File type Editing
File
management
required
.project IDE project file
× ○
.cproject IDE project file (CDT)
× ○
.cdtproject IDE project file (CDT)
Project created in GNU17 v1.3.0 or before
× ○
.gnu17project IDE project file (GNU17)
× ○
GDB17 Launch for <project name> .launch GDB launch setting file
× ○
<project name> _gnu17IDE.cmd
GDB command file
○ *
1
○
\.settings Project settings directory
× ○
\.externalToolBuilders Project settings directory (builder)
× ○
<project name> _gnu17IDE.mak
Makefile
× ×
<project name> _gnu17IDE.lds
Linker script file
× ×
<project name> _gnu17IDE.par Parameter file
× ×
<project name> .elf
Executable file
× ×
<project name> .map
Map file
× ×
<project name> .dump
Symbol file for two-pass make
× ×
<source filename> .d Dependency file for makefile
× ×
<source filename> .o
Object file
× ×
<source filename> .ext0
Assembler source file for two-pass make
× ×
<project name> .sa
S3 file generated based on the executable file
× ×
<project name> .saf File generated by filling open areas in the S3
file with 0xFF
× ×
<project name> .psa
ROM data HEX file
× ×
symtable.out Symbol table file for vector checker
× ×
raw.out Data file for vector checker
× ×
*
1: Can be edited using an editor only when the [Properties] dialog box for the project is closed.
The files in the "File management required" column must be managed using a source management application.