Epson S5U1C17001C, Manual

Page: 488 / 742

10-38
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
10.5.3 Using Menus and Toolbar To Execute Commands
Some commands are registered in the [File], [Reset], and [Control] menus, and on the toolbar in the [Source]
window as shown in Section 10.4.2. These commands can be executed by selecting one from a menu or clicking the
relevant toolbar button. Moreover, each window implements an equivalent function to execute a command. Table
10.5.3.1 below lists the registered commands.
Table 10.5.3.1 Commands specifiable from menus, toolbar, and windows
Command Window Menu/other Button
continue [Source] [Control]-[Continue]
until [Source] Popup menu –
step [Source] [Control]-[Step]
stepi [Source] [Control]-[Step Asm Inst]
next [Source] [Control]-[Next]
nexti
[Source] [Control]-[Next Asm Inst]
finish [Source] [Control]-[Finish]
User command * [Source] [User]-[User Command]
c17 rst
*
[Source] [Reset]-[Reset]
c17 savebreak
c17 savewatch
[Source] [Control]-
[Save breakpoints/Watch Symbols]
delete
c17 loadbreak
c17 loadwatch [Source] [Control]-
[Load breakpoints/Watch Symbols]
C17 profile
[Source] [View]-[Profile]
C17 coverage [Source] [View]-[Coverage]
break
[Source] Popup menu,
Mouse button –
tbreak [Source] Popup menu –
disable [Breakpoints] [Breakpoint]-[Disabled],
Popup menu –
enable
[Breakpoints] [Breakpoint]-[Enabled],
Popup menu –
delete
[Breakpoints] [Breakpoint]-[Remove],
Popup menu –
clear [Source] Mouse button –
x /b, x /h, x /w [Memory] Address entered from keyboard –
set {char}
,
set {short}
,
set {long}
[Memory] Data entered from keyboard –
info reg
[Registers] – –
set $
Register
[Registers] Data entered from keyboard –
info locals [Local Variables] – –
print
[Watch Expressions] Symbol name entered from keyboard –
file [Source] [File]-[Open...] –
source [Source] [File]-[Source...] –
quit [Source] [File]-[Exit] [Close]
*
The menu command/button executes the predetermined command file using the
source
command. The
contents of the command file may be freely edited by the user.
However, do not write a command that executes the command file itself, for example, when "
source
userdefine.gdb
" is written in the
userdefine.gdb
file, as it will enter an endless loop.