Epson S5U1C17001C, Manual

Page: 332 / 742

5-210
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
5 gnU17 iDE
C/C++ Make Project
Make settings for the
make.exe
executable that performs the build process. If you are using original makefiles
that you created, enter your changes on the page for the [Make Builder] tab. Do not change the pages on other
tabs.
[Build command]
[Use default]
Leave this check box unselected if you wish to edit the make.exe command line.
[Build command:]
Edit the make.exe command line. (Change the makefile to the one you created.)
[Build Setting]
[Stop on first build error.]
If this is selected, the
IDE
stops building upon the occurrence of an error. This check box is enabled
when [Use default] is selected.
[Workbench Build Behavior]
[Build on resource save (Auto Build)]
Specify the target in the makefile to be called during an auto build. By default, "
all
" is called. (This
option is not used with the default IDE settings.)
[Build (Incremental Build)]
Specify the target in the makefile to be called during a build process. By default, "
all
" is called.
[Clean]
Specify the target in the makefile to be called during a clean process. By default, "
clean
" is called.
[Build Location]
Although this field is used to specify the working directory during a build, no entry is required here.
If you are using your own makefiles, you must also edit or make changes on other pages. For more information,
refer to Section 5.7.11, "Using an Original Makefile".