Epson S5U1C17001C, Manual

Page: 597 / 742

10-146
EPSOn
S5U1C17001C ManUal
(C COMPilEr PaCkagE fOr S1C17 faMily) (Ver. 1.5.0)
10 DEBUggEr
c17 savewatch
(store symbols registered in Watch Window) [ICD Mini /Sim]
Saves the symbols registered in the Watch Window to a file (CURRENT PATH\watch.gdb).
Use the c17 loadwatch command to re-register the symbols to the Watch Window.
c17 savewatch
Assume that the symbols below are registered in the Watch Window:
Name Value
----------------------------------------------------
main {int ()} 0x12c <main>
//Function name
i 0x1234
//int type variable
szBuf unsigned long [10]
//Array
Then, the symbol names below are stored.
main
i
szBuf
• Each time this command is executed, the contents stored by the gdb debugger are updated.
• This command will generate errors unless the target command is executed.
Error message: "C17 command error, command is not supported at present mode."
• The symbols are not stored in the following cases:
1.The Watch Window is closed.
2. No symbols are registered.
• Up to 300 symbols can be stored. Symbols exceeding this number will not be stored.